Grinding The Best Method by a Long Shot
Grinding The Best Method by a Long Shot
For nearly 50 years, scarifying and shot blasting machines have looked and functioned the same For those who still believe that these methods are the smartest way of machining a floor, it's time to think again.
The development of these machines and tools means that there is no longer any reason at all for continuing to use old-fashioned methods and equipment.
Grinding
- Functions on all surfaces
- Many areas of use
- A flat surface can always be achieved
- Close to edges
- Low noise level and little dust
Scarifying / Shot blasting
- Impossible to get a flat surface. Grinding or selflevelling compound is required afterwards
- Leaves lines that can often be seen under the covering
- Extra covering material is required
- Leaves 70-90 mm from the wall
- Lots of dust, vibrations and noise
- Few areas of use
One Machine, Many Work Areas
The tools underneath are the key
CONCRETE GRINDING
When grinding concrete floors, the concrete skin is removed and the stronger concrete exposed. At the same time, the surface is ground level, which reduces the need for self-levelling compound and reduces the quantity of floor covering, with major financial savings as a result.
THICK COVERINGS
Thick coverings refers to epoxy, self-levelling compound, linoleum and plastic matting. In one sweep, 5 mm of epoxy or self-levellin compound can be removed. When grinding away matting, the adhesive is also ground away, and the floor is ready to be covered with a new carpet, covering, tiles, or ready for polishing.
THIN COVERINGS
Thin coverings refers to adhesive, paint or lighter grinding to improve the adhesion of a new covering on top of an old one. The machines function superbly for lighter grinding of irregularities in the self-levellingcompound.
NATURALSTONE
With a simple tool change under the machine, you can transform your grinding machine, allowing you to grind any type of marble, granite or terrazzo floor
WOOD GRINDING
With grinding machine, anyone can grind a wooden floor. You can get close to the edges and do not need to follow the grain of the wood. If the machine is used with an external vacuum cleaner, the floor can be ground dust-free. One machine, many work areas The tools underneath are the key